Started RF Input and Product Detector Layout

Started the layout of the RF input and Product Detector today on paper…and just finished gluing down the pads for these next two stages.  I normally draw the layout on paper and then use it as a template to glue down the pads on the PCB. This time, after doing the layout on paper, I used a black marker and did the template on the PCB and then glued down the pads. A bit more organized and less stressful to say the least.  Here is the schematic for these next two stages:

input amp and product detector

 

 

 

 

 

 

I will also do the LO to product detector interface transformer when I do these two stages. Have to let the pads sit for at least an hour or else they have a tendency to pop-off the PCB when I tin the pads.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: